LastWeek

100% Total progress

1 closed (50%)   1 open (50%)

Related work packages

• closedUser story #3276: New Requirement From Visteon to Seq Validation Process Discussion
• User story #3305: PY!B High Model Implementation Support

Unassigned

75% Total progress

95 closed (62%)   57 open (38%)

Related work packages

• Task #535: Quote Preparation for X451 and Q5 variant addition in W601
• Task #1290: CYCLE TIME REDUCTION IN W601 EOL
• Task #1293: FAILURE REPORT ANALYSIS - W601
• closedTask #1294: FAILURE REPORT ANALYSIS FOR 4TH FEB BUILD
• closedTask #1296: Sequence file edit based on failures.
• closedTask #1301: FAILURE REPRT ANALYSIS FOR 9TH FEB BUILD
• Task #1328: W601 BUILD SUPPORT
• closedTask #1329: W601 90nos BUILD SUPPORT
• closedTask #1336: March 2 W601 Build failure analysis
• Task #1473: Check the Updated READ DTC Logs from the Cluster.
• closedTask #1476: Support Z101 High 55 No's Build.
• closedTask #1496: Supported Z101 build ( 60 nos)
• closedTask #1498: W601 build support 20 nos
• closedTask #1887: Motor Rotation Issue and Wire Gland Fixing
• closedTask #1910: Image Blank issue in Production 1)Remove the Create Random image name in Pattern match function.
• closedTask #1950: W601 Machine Failure Check during Wakeup condition add in the Previous Station.
• closedTask #1971: Gland Change Trail
• closedTask #1980: Check TATA GEN 3 Sample Software
• closedTask #2629: Model addition ( X451 CNG )
• closedTask #2630: Extra Telltale addition
• closedTask #2631: vision teaching (new Variant X451 CNG)
• closedTask #2632: X451 CNG Vision validation
• closedTask #2643: 1 st build X451 CNG
• closedTask #2649: Image added for manual check in X451 CNG model
• closedTask #2677: 2 nd production X451 CNG
• closedTask #2678: Z101 GSL and DSL Speedo and Tacho pointers new verification points addition.
• closedTask #2679: Z101 new sequence validation
• closedTask #2768: W601 new sequences added
• closedTask #2770: W601 production suppport
• closedTask #2790: Z101 Failure images checked
• closedTask #2791: Sweep verification points range increased
• closedTask #2817: Reverting Snap scan 2D camera power cable
• Task #2827: ODO Reset Problem in QY CAT
• closedTask #2840: Changing program to switch silver box
• closedTask #2841: S237 Model addition
• closedTask #2842: FE0E DID Addition
• closedTask #2843: New Silver Box Wiring
• closedTask #2844: EXE Build
• closedTask #2845: S237 Model Validation
• closedTask #2854: Meeting with Bala
• closedTask #3001: Read Command FD63 Added
• closedTask #3002: MXEE Script FD20
• closedTask #3003: MXEE test program updated
• closedTask #3017: Shared MXEE test result
• closedTask #3046: System config VI and Configurable window for devices done
• closedTask #3047: UI for Model addition + Automatic files creation
• closedTask #3067: Adding EEPROM DID and MXEE Routine.
• closedTask #3095: Supporting Sridar for adding New ALC in W601 EOL machine
• closedTask #3111: PY1B LHD L7 Model Addition Discussion and Mxee Test Validation.
• closedTask #3143: Z101 sweep delay addition
• closedTask #3155: TATA vision eol machine hanging issue
• closedTask #3156: correcting NI MAX
• closedTask #3157: PXIE CAN 4 th head not working
• closedTask #3158: PY1B LHD L7 variant added
• closedTask #3159: Speed linited and rear fog teltale added
• closedTask #3160: Configuration data MXEE script added
• closedTask #3162: Monday(17-6-2024) running variants reteached and validated
• closedTask #3163: PY1B bottom head vision
• closedTask #3164: PY1B top head vision
• closedTask #3165: Tuesday(18-6-2024) running variants reteached and validated
• closedTask #3166: Wednesday(19-6-2024) running variants reteached and validated
• closedTask #3215: Discussion regarding s220 cycle time reduction with quality team balaji
• closedTask #3216: Lin communication issue in RBC EOL
• closedTask #3217: MXEE test for PY1B LHD L7
• closedTask #3233: RBC Py1b low L6 2 variant FTT improvement
• closedTask #3280: Vertical bar display color append support
• closedTask #3351: Serial number length reduction in RBC Machine
• closedTask #3352: S220 Fixture receiving
• closedTask #3353: S220 fixture Wiring work
• closedTask #3391: Mechanical Support
• closedTask #3400: Top Head Vision teach and Functionality check
• closedTask #3401: Camera angle adjusted in TOP head W601 V1 machine
• Task #3402: TATA Variant Running model Monitoring after camera adjustment
• closedTask #3405: Mechanical Support_Barcode L clamp and PIN insert spring installed
• Task #3409: S220 Head 3 and 4 Vision support
• Task #3454: S220 and S237 new version silver box validation
• closedTask #3473: Discussion regarding Np validation in W601 machine
• closedTask #3539: RBC Customer Concern (Display line in PY1b2 MY24 HIGH variant)
• closedTask #3639: W601 Tacho chaplet vision check (mechanical support)
• User story #2463: VERITICAL DISPLAY VISION NOT CLEAR
• closedUser story #2464: CLOCK TEST FAIL_S220
• closedUser story #2467: Cluster Dowel Pin Height to be Increase
• User story #2468: LVDS CABLE Connector Holder Placement
• User story #2470: Ethernet Driver to be Develop for Printer
• User story #2503: UPS Driver to be develop with running Status
• User story #2513: Monthly FTT - Variant wise Data tracking need to be Done
• closedUser story #2515: Variant wise tracking need to be Done
• closedUser story #2516: Record the Vision Image
• User story #2529: Create UI for allocating Comports
• User story #2530: New Variant addition UI need to be develop
• User story #2531: PXIE ON/OFF Status Message
• closedUser story #2628: Power pin insert issue, ( making cluster to lift on one side)
• User story #2826: QY CAT- ODO Reset Problem in BI3 SVC Model Support
• closedUser story #2839: S237 Model Addition
• closedUser story #3109: PY1B LHD L7 Model Addition In RBC EOL
• closedIssue #3161: Camera frame disturbed_RBC EOL